|Place of Origin:||Guangdong|
|Minimum Order Quantity:||1 set|
|Packaging Details:||PE film, wood frame, wooden box or customized|
|Delivery Time:||30 Working Days|
|Payment Terms:||L/C, T/T, Western Union|
|Supply Ability:||1set/1 month|
|Voltage:||Apply To Local Indusrty Voltage||Warranty:||12 Months|
|Driven Type:||Electric Power||HS Code:||8479400000|
|Measurment:||20m*2.5m*2.5m||Test Standard:||ASTM E119|
10 MW Flammability Test Apparatus,
Heat Release Rate Test Device,
Microcomputer Controlled Flammability Test Apparatus
HH-FT-8373 Vertical Test Machine for Fire Resistance of Building Elements
Applicable to buildings and large complexes (including locomotive vehicles, vehicles, warehouses and components) and extensive fire resistance test verification for raw materials, buildings and physical models
1. The whole machine consists of standard test room, standard ignition source, cone collector, gas analyzer, exhaust pipe, flue gas cooler, fan and measuring device.
2. Standard test room:
Dimensions: long 6000 plus or minus 50mm, width 4800 + 50mm, high 2400 + 50mm
3. The door of the standard test room is located at the center of the wall with a short side of 4800*2400mm wall, and the floor roof has no air vents. The size of the door is 800 plus or minus 10mm, and the height is 2000 plus or minus 10mm.
4. The test room is composed of non-combustible materials with a density of 500-800kg/M3 with a thickness of 25mm.
The center of the north wall of the combustion chamber has a gate of 0.8m-wide x2m, and a 2m x2m viewing window on the east wall.
An electron is placed at the geometry center of the combustion chamber. The measuring range is 0--500 kg, and the measurement accuracy is 0.001kg, which can be used to measure the loss of the combustor during the combustion process.
Southwest corner of the room set up total fire, firearms, the total fire use square openings of gas total firearms within the total is divided into two layers, the lower is the grit, the upper is fine sand, separated with wire mesh in the middle
During the test, the combustion of the sample and the combustion products are discharged from the exhaust pipe.
Carbon monoxide range: 0-1%, measuring accuracy plus or minus 0.1%
Carbon dioxide (CO2) measurement range 0-10% and repeatability < 1%;
High precision pressure regulating valve, adjusting standard pressure;
The glass rotor flowmeter regulates the flow of combustion jet.
Smoke density: light source, halogen lamp, convex lens, silicon photocell 4
Temperature measurement: 5m thermoelectric pot 7, 0.25mm thermoelectric pot 5.
Streatchable PE film wrapped, wooden frame packed, loaded into container for shipping. Special packaging way as per discussed.