HH52127 Wire Testing Equipment , Bunched Cable Vertical Flame Spread Tester
HH52127 Bunched Cable Vertical Flame Spread Tester
Bunched cable vertical flame spread tester is used to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of bundle cable or fiber optic cable. In accordance with IEC60332—3—10: 2009<Tests on electric and optical fiber cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunches wires or cables>
• IEC60332—3—10: 2009
• Internal dimensions of stainless steel test chamber: 1,000(W)×2,000
(D) ×4,000(H)mm, supplemented with insulated mineral wool material
• At the lower section of the test chamber, there is a 800(W) x 400(D) sized hole at the 150mm position from the front side of the chamber to supply the air
• Exhaust hole of the top: 300(W) ×1, 000(D)mm
• Wide stainless steel ladder dimensions: 500(W) ×3, 500(H) mm;
• Standard stainless steel ladder dimensions: 800(W) ×3, 500(H);
• Two sets of banding standard propane burner devices
• Two sets of venturi gas mixing devices
• Pressure gauge and pressure reducing valve device, which is able to adjust propane and air pressure to 0.1 MPa
• Control and regulation of gas supply: airflow is rotor flowmeter
10 ~ 100L / Min adjustable, propane flow is rotor flowmeter 2 ~ 20L /
• Cabinet with ladders and handrails is more convenient for users to observe at the top
• With a ball valve enable to manually shut down the gas supply
• Set flame test time automatically, and by then the air supply can be cut off automatically
• Mounted K thermocouples inside the chamber, indicating the internal temperature
• With forced fire extinguishing device
• Automatic lifting device
• External dimensions of the burning cabinet: 1150(W) ×2150(D) ×5110(H)mm
• External dimensions of the control cabinet: 1280(W) ×830(D) ×1290(H)mm
• Power supply: AC 220V, 50/60Hz, 2A
• Air source: propane and air( prepared by users)
Based on our rigorous delivery system,our shipments are very timely and the process is very systematic.
Factory & Workshop &Warehouse
Dongguan Jinju Machine Co., Ltd is HOOHA Company Limited factory, which was established in 1998,with full experience on wire and cable machinery manufacturers in Dongguan,China.
Due to international market developing,we expanded the space from 2000 sq meters to 8000 sq meters
||Upcast and continuous casting machine,wire extrusion machine,wire stranding machine,wire drawing machine,test machine and so on.
|Value added service
||Include factory planning, cable raw material supply,cable equipment layout,cable technology export,technical support and operation training and cable testing laboratory construction.
||Humen Town,Dongguan City,Guangdong province.
||More than 2000 sqm.
HOOHA is not only attending Shanghai , Guangzhou exhibition, but also attending India , Thailand , Russia ,Indonesia and German exhibition and so on
1.Shenyang Wire & Cable Industrial Exhibition
2.Guangdong Wire & Cable Machinery Exhibition
3.Guangzhou Wire & Cable Exhibition
4.Shanghai International Wire & Tube Exhibition
5.Shanghai Wire & Cable Industrial Exhibition
6.Indonesia Wire And Cable Industrial Exhibition
7.Dongguan UL Wire And Cable Exhibition
What can we provide