Roof Photovoltaic Module Wire Testing Equipment UL 790 ZY6271 IEC 61730 - 2
Scope of application:
The roof combustion test system is an instrument that evaluates the fire resistance of the roof and components in the simulated real conditions and evaluates the grade A~C level of the sample at A1.82 m, B 2.4m and C 3.9 m. At the same time, it can be used for flame retardant performance test of photovolt battery.
Meet the standard:
The smoke detection monitor of individual residential units in multi-family homes and hotel rooms: electric signal detectors to detect the smoke status of residential buildings;
Compliance with UL 790: standard fire test method for roofing materials;
Compliance with IEC 61730-2 appendix A: photovoltaic module combustion test;
Meet ASTM E 108-04: standard fire test method for roofing material.
The cylinder can easily control the slope of the deck
2 fire prevention board is attached with test deck
Use automatic control valve to adjust the temperature
- grade A, B: 760-28 ℃ (1400 + 50 ℉) - 1400 ~ 21000 Btu/min (369 ~ 387 kWh)
- grade C: 704-28 ℃ (1300 + 50 ℉) - 1300 ~ 18000 Btu/min (316 ~ 334 kWh)
Each gas transmitted to the burner must be tested and controlled in different ways
-lng: use MFM to measure air flow accurately (air flow is controlled by automatic control valve)
- LPG: use the inverter system to adjust the air flow rate: the test deck has a speed of 19 + 8 km/h(5.5 m/SEC)
Using automatic ignition method, the test can be automatically ignited at the same time
A guide board is attached to the vent line to protect the flow turbulence of the supply test deck from outside interference
A slope adjustment panel is installed in the ventilation pipeline to adjust the direction of air flow
12 top burner 58.7 mm equipped with thermocouple, can test the temperature to 888 + 28 ℃
Use DAQ system to automatically control and complete the test
Based on our rigorous delivery system,our shipments are very timely and the process is very systematic.
Factory & Workshop &Warehouse
Dongguan Jinju Machine Co., Ltd is HOOHA Company Limited factory, which was established in 1998,with full experience on wire and cable machinery manufacturers in Dongguan,China.
Due to international market developing,we expanded the space from 2000 sq meters to 8000 sq meters
||Upcast and continuous casting machine,wire extrusion machine,wire stranding machine,wire drawing machine,test machine and so on.
|Value added service
||Include factory planning, cable raw material supply,cable equipment layout,cable technology export,technical support and operation training and cable testing laboratory construction.
||Humen Town,Dongguan City,Guangdong province.
||More than 2000 sqm.
HOOHA is not only attending Shanghai , Guangzhou exhibition, but also attending India , Thailand , Russia ,Indonesia and German exhibition and so on
1.Shenyang Wire & Cable Industrial Exhibition
2.Guangdong Wire & Cable Machinery Exhibition
3.Guangzhou Wire & Cable Exhibition
4.Shanghai International Wire & Tube Exhibition
5.Shanghai Wire & Cable Industrial Exhibition
6.Indonesia Wire And Cable Industrial Exhibition
7.Dongguan UL Wire And Cable Exhibition
What can we provide