Usage: | Stranding | Twisting Section: | 0.80-6mm2 |
---|---|---|---|
Brand: | HOOHA | Color: | Customer Demand |
Gross Weight: | 400kg | Twisting Distance: | 4.2-130mm |
Power: | 10HP | Net Weight: | Approx4000kg |
Noice Level: | Approx80db | Motor: | Germany-Siemens |
Bearing: | Japan-NSK | ||
High Light: | Copper Core Data Wire Stranding Machine,380V Electronic Wires Stranding Machine |
Product Description
Application
It is suitable for stranding of the copper wires with more than seven strands, also suitable for electronic wires, power wires, bare copper wires, network wires etc.
Wire Inlet Structure
(1) After all the lines are released from the pay-off rack, they enter the splitter board through a set of guide wheels and enter the eye mold for twisting.
(2) Distribution board gauge: Our standard distribution board has 19 holes (also can be customized according to customer requirements).
(3) Inlet eye mold specification: (Outer circle) Ø25* (Height) 15, inner hole design according to customer requirements.
Wire rewinding structure
(1) Bobbin: Standard bobbin: (outer diameter) Ø630* (outer width) 375* (inner hole) Ø56; pine hole: Ø25; distance to the bobbin hole: 99mm (max.) or 83mm (min.)(It may be customized too)
(2) Tension: There is a manual mechanical tension regulation system that is mainly used for regulating the pressures of springs.
(3) Loading and unloading of the bobbin: The bobbin has a hydraulic lifting iron shaft, convenient and flexible.
Technical Specification
Model | Right-hand model. The operator faces its front and the wires enter it from its right side |
Rotation speed of arched band | Max: 1800RPM. The bow strap is a guide wheel bow strap |
Twisting pitch | 15-60.24mm (can be adjusted appropriately according to customer needs), manual gear change twisting pitch |
Stranded wire length calculation | How many meters per minute = twisting distance *2/1000* twisting bow speed per minute |
Twisting direction | Arbitrary selection of left and right twisting direction |
Single wire diameter | Ø0.16mm-Ø1.0mm |
Stranding area | 0.4 mm2-5.5 mm2 |
Traverse | German-style bearing polished rod Traverse, the Traverse range and Traverse distance can be adjusted |
Spindle lubrication | Use manual grease gun to inject oil |
Drive motor | AC 380V 1400RPM 10HP Siemens +10HP Japan Yaskawa inverter. Stepless speed regulation |
Brake | Electromagnetic brake, automatic brake for internal and external disconnection |
Disconnection protection | When internal and external disconnection occurs, it will automatically stop and alarm |
Inching | The inching button outside the electrical console |
Speed display | Tachometer on the control panel |
Electrical control | The setting and operation of equipment electrical parameters are set through the control panel |
External power cord | The external power cord is pulled to the electric control box by the user |
Warning light | Red: shutdown due to failure |
Meter counter | Six-digit electronic meter counter |
Electrical components | National or international high-quality brands |
Bearings | Bearings imported with original packaging from Japan and Germany (such as KOYO, NSK and FAG) |
Internal accessories | National or international high-quality brands |
Machine noise | Below 75dp (measured 1000mm away) |
Ambient humidity | Can not exceed 90%, if it exceeds, please dry it before turning on the machine |
Workshop temperature | Can not exceed 40℃, if it exceeds, the inverter will automatically protect and trip |
Floor area | L3100*W1500*H1600MM |
Box color | Blue (according to customer requirements) |
Standard Accessories
(1) Change gears (one set) (they are corresponding to the pitch gauge and their quantity may be properly increased or decreased as requested by the customer)
(2) Tool kit (one piece) (There is a set of common tools. The details are as follows.)
①Nine-piece inner hexagon spanner (one set)
②Adjustable wrench (one piece)
③Screwdriver (one piece)
④Nipper pliers (one pair)
⑤Grease gun (one piece)
(3) Machine Manual (one copy)
(4) Anti-vibration pad (one set made up of four pieces)
(5) Spindle pulley and flat pulley (one set)
Equipment Layout
Factory Picture
Company Profile
Our aim: To be a world-class supplier providing wire & cable manufacturing and using solution.
Our vision: To make wire & cable manufacturing and using more humanized.
Our target: More professional customer service, struggle for employees' dreams.
We are a Hong kong company, focusing on in-depth cooperation with Chinese leading manufacturers to provide advanced wire&cable solut
Exhibitions and Certificates
FAQ
1. who are we?
We are based in Guangdong, China, start from 2017,sell to Africa(17.00%),Mid East(17.00%),Southeast Asia(16.00%),Eastern Asia(13.00%),South Asia(10.00%),South America(8.00%),Eastern Europe(4.00%),North America(3.00%),Northern Europe(3.00%),Southern Europe(3.00%),Oceania(2.00%),Western Europe(2.00%),Central America(2.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Drawing Machine,Stranding Machine,Cabling Machine,Extrusion Machine,Bunching Machine
4. why should you buy from us not from other suppliers?
1.10 year R&D working experience with over sea service 2.5 big LV/MV cable project over 5 million working experience 3.After service team has 30 country working experience 4. HOOHA team focus on the cable making and use solution supply chain.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C,Credit Card,PayPal,Western Union,Cash;
Language Spoken:English,Chinese