HH-TT-500A High Speed Triple Pair Twisting Machine - Type A

Suitable for LAN cable pair twisting, the back-twist rate can be arbitrarily set within the range of 0 to 100% , according to the wire requirements, so that the wire can meet the requirements of Cat5e, Cat6, Cat 6A and Cat 7 (excluding those that cannot meet the testing standards due to unqualified raw materials), and the speed is increased by more than 30% -50% compared to traditional back-twist & pair-twisting machines .

Inquiry Now

Product Introduction
Product Parameters
Product Additional Service Description

Product Introduction

1. Application
Suitable for LAN cable pair twisting, the back-twist rate can be arbitrarily set within the range of 0 to 100% according to the wire requirements, so that the wire can meet the requirements of Cat5e, Cat6, Cat 6A and Cat 7 (excluding those that cannot meet the testing standards due to unqualified raw materials), and the speed is increased by more than 30% -50% compared to traditional back-twist & pair-twisting machines.

Product Parameters

Main specification
A p plication	Suitable for back - twist and pair twisting of CAT 5 /5 e , CAT 6, CAT 7 LAN cables .	Back - twist rate	0 - 100%
Wire spec .	Ø0.8 ~ 2.0 mm	Twisting direction	S / Z , free setting
Twisting OD	Ø1.5 ~ 3.5 mm	Tension range	0.6 ~ 3.0 kg
Twisting pitch	8 ~ 15 0 mm	Tension display	Digital tension displayer
Rotate speed	Max . 16 00rpm	Pitch setting	Servo electronic pitch , set by touch s c reen

Machine component
I TEM	D ESCRIPTION	QTY .	U NIT	R EMARKS
0 1	Single twisting machine with back - twist payoff	1	SET
0 2	Double twisting machine	1	SET
0 3	Electrical control System	1	SET
0 4	Matched tools and spare parts	1	SET

3.Features
3. 1 Tripe pitches design, 1.5 times speed to traditional double twisting machine when with 33% back-twist rate.
3.2 Servo electronic pitch, setting by touch screen, PLC controller, accuracy within ±2%.
3.3 Active type take-up, tension stable from empty to full bobbin.

4. Full line of safety devices:
1) If the safety door is not closed or tight, it will stop by itself;
2) If the lifting tray is not in place, it will stop by itself;
3) The meter length has not been reset to zero, and it will stop by itself;
4) The fault indicator is not cleared, and the machine stops automatically;
5) Shut down automatically after disconnection;

Product Additional Service Description