Suitable for LAN cable pair twisting, the back-twist rate can be arbitrarily set within the range of 0 to 100% according to the wire requirements, so that the wire can meet the requirements of Cat5e, Cat6, Cat 6A and Cat 7 (excluding those that cannot meet the testing standards due to unqualified raw materials), and the speed is increased by more than 30% -50% compared to traditional back-twist & pair-twisting machines.
A p plication | Suitable for back - twist and pair twisting of Cat 5 e , Cat 6/6 A , Cat 7 LAN cables . | Back - twist rate | 0 - 100% |
Wire spec . | Ø 0 .8 ~ 1.7 mm | Twisting direction | S / Z , free setting |
Twisting OD | Ø1.5 ~ 3.5 mm | Tension range | 0.6 ~ 3.0 kg |
Twisting pitch | 5 ~ 60 mm | Tension display | Digital tension displayer |
Rotate speed | Max . 18 00rpm | Pitch setting |
Servo
electronic
pitch
,
set
by
touch
s c reen |
2.Machine component
I TEM | D ESCRIPTION | QTY . | U NIT | R EMARKS |
0 1 | Single twisting part with back - twist | 1 | SET | |
0 2 | Capstan part | 1 | SET | |
0 3 | Pair twisting part | 1 | SET | |
0 4 | Electrical control unit | 1 | SET | |
0 5 | Matched tools and spare parts | 1 | SET | |
0 6 | Electrical manual | 1 | PCS |
3.Features
3. 1 Tripe pitches design, 1.5 times speed to traditional double twisting machine when with 33% back-twist rate.
3.2 Servo electronic pitch, setting by touch screen, PLC controller, accuracy within ±2%.
3.3 Active type take-up, tension stable from empty to full bobbin.
3.4 Full line of safety devices:
1) If the safety door is not closed or tight, it will stop by itself;
2) If the lifting tray is not in place, it will stop by itself;
3) The meter length has not been reset to zero, and it will stop by itself;
4) The fault indicator is not cleared, and the machine stops automatically;
5) Shut down automatically after disconnection;
1. Machinery installation layout design
2. On-spot installation service (negotiable)
3. Whole factory layout design

4. 24-hours consulting team
