wire making equipment,
electric wire making machine
CATV Cable Complete Production Line,Algeria 12 Years Export Team Support
1. copper wire twist
2. copper wire insulation
3. 2 cores twist
1.copper wire twist
Application of the equipment
It is suitable for stranding of the copper wires with more than seven strands, such as electronic wires, power wires, bare copper wires, network wires, etc
2.copper wire insulation--70 PE insulation line
Apply to PE insulation in electrical wire and power cable etc extruding.
Finish OD :1mm-12mm
Extruder capacity:100 kg/hr ( PE )
Wire concentricity:above 95%
Line speed:According to wire diameter 200-350m/min
Central Height of machine:1000mm distance to ground
Power:3 phase 380V, total power 40KW
3.braiding machine--16 spindle braiding machine
Applied to the shielding or braiding of all kinds of high quality electric wire , computer wire etc
Specification And Parameters
Bobbin number:16(8 is inside,8 is outside )
Bobbin size:80mm x 22mm x 80mm
Braiding pitch:3.2-35.5mm or 6.4-65mm
Braiding cable diameter:Max.14mm
Produce speed :Max.485 m/hour(7-8m/min)
Braiding wire material :0.1-0.2mm,Al,Mg wire,copper wire etc
4. PVC sheath -- 80 Extrusion Machine
This equipment is applicable to outer surface extrusion of wires and cables for insulation materials with PVC
1.Extrusion Wire Gauge:decide by customer
1) Inlet Wire Diameter:1mm-12mm
2) Finished Wire Diameter:2-20mm
2. Screw Diameter: the screw diameter is 80 mm.
3. Extrusion Capacity (when the head is turned on):Φ80 Machine =max 200 kg/hr
4. Linear Velocity:250 m/min
5. Length of Production Line:26 m
6. Installed Capacity:about 60 KW/hr
Q:What HOOHA can support us if we are going to the wire and cable field ?
A:HOOHA is a manufacturing and trading combo for wire and cable industry field , with more than 15 years full experience and a professional team on sales and technical.
At HOOHA our mission is to be a team of highly skilled experts who collaborate to bring the best quality products, custom solutions, and innovative thinking to our customers.
1. Our pre-service team for machine designer ( 5 member) and wire and cable engineering (5) are over 15 years experience;
2. After service on electricity engineer (10), machinical engineer(8),software engineer(5) are over 10 years experience;
3. Sales team who is specialized in wire and cable engineering field ( 10 ) , are over 8-10 years experience in focus ;
4. Production self-inspection team (5),are over 15 years experience.